Water Level Sensor Depth of Detection Water Sensor for Arduino
  • Water Level Sensor Depth of Detection Water Sensor for Arduino

Water Level Sensor Depth of Detection Water Sensor for Arduino

BDT 250
Quantity
In-Stock

  • Store Pickup Available! Store Pickup Available!
  • Shipping Available Shipping Available
Description

 

Water Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. Easy to complete water to analog signal conversion and output analog values can be directly read Arduino development board to achieve the level alarm effect.

 

Specifications:
    1. Product Name: water level sensor
    2. Operating voltage: DC3-5V
    3. Operating current: less than 20mA
    4. Sensor Type: Analog
    5. Detection Area: 40mmx16mm
    6. Production process: FR4 double-sided HASL
    7. Operating temperature:10℃-30℃
    8. Humidity: 10% -90% non-condensing
    9. Product Dimensions: 62mmx20mmx8mm

Product Details
3 Items

Click here to leave a review

30 other products in the same category:

9 Degrees of Freedom Breakout- MPU9250

9-Axis Gyro + Accelerator + Magnetometer Sensor Module MPU-9250   Features and Specifications: Chip: MPU9250; Power voltage: 3~5V Communication mode: I2C / SPI Gyro range: +/-250, +/-500, +/-1000, +/-2000dps Accelerator range: +/-2G, +/-4G, +/-8G, +/-16G Magnetometer range: +/-4800uF Pin spacing : 2.54mm

Price BDT 1,150
More
In-stock

APDS-9930 RGB and Gesture Sensor

Description: This is RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. This is, in fact, the same sensor that the Samsung Galaxy S5 uses and is probably one of the best gesture sensors on the market for the price.

Price BDT 1,000
More
In-Stock

Formaldehyde/ Formalin Detection Sensor

VOC gas sensors are used to detect formaldehyde, toluene, benzene, etc., is a type of semiconductor sensors, it is widely used in ventilation, ventilation fans, air filters, hood, hood and other equipment. With high sensitivity and stability, able to detect more than 0.1ppm gas, air suitable for detecting a variety of volatile organic components...

Price BDT 2,800
More
In-Stock

Current Sensor ACS712-30A

Product Description 1. Current sensor chip: ACS712ELC-30A. 2. Pin 5V power supply, on-board power light. 3. The module can be measured plus or minus 30A current, Corresponding analog output of 66 mV / A. 4. No test current through, the output voltage is VCC / 2. 5. PCB size: 31 (mm) x13 (mm). 

Price BDT 250
More
In-Stock

MQ-8 Hydrogen Gas Sensor

This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity and fast response time.

Price BDT 250
More
In-Stock

MQ-2 Flammable Gas & Smoke Sensor

Gas Sensor(MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol, Smoke or Propane. Due to its high sensitivity and fast response time, measurement can be taken as soon as possible. The sensitivity of the sensor can be adjusted by the potentiometer.

Price BDT 200
More
In-stock

TTP223B Digital Touch Sensor Capacitive Touch

Specification: The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode. Features: Low power consumption Power supply for 2 ~ 5.5V DC

Price BDT 250
More
In-Stock

SparkFun Particle Sensor Breakout - MAX30105

Features: Built-in Red, IR, and Green LEDs 5V operation (3.3V is allowed, but green LED is not guaranteed to operate) Applications include presence detection, distance sensing (18" max), pulse oximetry, blood oxygen saturation level (SpO2), smoke and particle detection Documents: Schematic Eagle Files Hookup Guide Datasheet (MAX30105) MAX3010x Sensor...

Price BDT 2,000
More
Pre-Order

MQ-5 Smoke Gas Detector Sensor

The MQ series of gas sensors use a small heater inside with an electrochemical sensor. They are sensitive to a range of gasses and are used indoors at room temperature. The output is an analog signal and can be read with an analog input of the Arduino.

Price BDT 190
More
In-stock

Force Sensitive Resistor 0.5"

Description: This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance.

Price BDT 650
More
Last items in stock

Arduino GSM / GPRS SIM900 Shield

Details: The GPRS Shield is based on SIM900  module from SIMCOM and compatible with  Arduino and its clones. The GPRS Shield  provides you a way to communicate using  the GSM cell phone network.

Price BDT 2,200
More
There are not enough products in stock

Waterproof DS18B20 Digital Thermal Probe or Sensor

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get any signal degradation even over long distances!

Price BDT 250
More
In-Stock

RC522 RFID Card Reader Module Kit Android NFC supported

Specification: Module Name: MF522-ED Working current:13—26mA/ DC 3.3V Standby current:10-13mA/DC 3.3V sleeping current:<80uA peak current:<30mA Working frequency:13.56MHz Card reading distance :0~60mm(mifare1 card) Protocol:SPI data communication speed:Maximum 10Mbit/s

Price BDT 180
More
In-Stock

GY-9960LLC APDS-9960 RGB and Gesture Sensor Module

Specification:1. Small size: 11mm*27mm2. Low power consumption: Supply voltage 2.5V ~ 5V, operating current is microamps3. Linear Good4. High Sensitivity5. High stability6. Detection range: 240nm-370nm7. Large angle: 130 degrees8. The Schottky type of photodiode for photoelectric mode

Price BDT 1,000
More
In-Stock

MQ-7 Carbon Monoxide Gas Sensor

MQ-7 Carbon Monoxide Gas Sensor This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance.

Price BDT 250
More
In-stock

BH1750FVI Digital Light intensity Sensor

Chip: BH1750FVI Power Supply: 3.3V - 5V Light Range:0 - 65535 lx(Lux) Sensor Built-in: 16 bit AD converter Size(L x W): Approx. 3.2cm x 1.5cm Direct digital output, bypassing the complex calculation, bypassing the calibration Close to the spectral characteristics of visual Widely used to 1-lux high precision measurement Standard NXP IIC communication...

Price BDT 550
More
Last items in stock

TCRT5000L Reflective Optical Sensor

The TCRT5000 and TCRT5000L are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version.

Price BDT 20
More
In-Stock
Customers who bought this product also bought:

LM35 Temperature Sensor

Description The LM35 series are precision integrated-circuit temperature sensors, with an output voltagelinearly proportional to the Centigrade temperature. Thus the LM35 has an advantage over linear temperature sensors calibrated in ° Kelvin, as the  user is not required to subtract a large constant voltage from  the output to obtain convenient...

Price BDT 85
More
In Stock

Dust Sensor For Arduino

Dust Sensor, A simple Air Monitor Overview Sharp GP2Y1010AU0F onboard, detecting fine particle larger than 0.8μm         in diameter, even like the cigarette smoke Low power consumption, analog voltage output, the output level is linear         with dust density Embedded voltage boost circuit to support wide range of power supply

Price BDT 890
More
Pre-Order

Follow us on Facebook