Digital Tachometer Speed Module Sensor for Arduino UNO
  • Digital Tachometer Speed Module Sensor for Arduino UNO

Digital Tachometer Speed Module Sensor for Arduino UNO

A tachometer is a simple module that allows you to test the speed of the motor.Widely used for motor speed detection, Pulse count, position limit, and so on.

BDT 500
Quantity
Last items in stock

  • Store Pickup Available! Store Pickup Available!
  • Shipping Available Shipping Available
Description

Description:

Tachometer is a simple module that allows you to test the speed of the motor.Widely used for motor speed detection, Pulse count, position limit, and so on.

Features

Puzzle interface
infrared photoelectric sensor
Working voltage 3.3v-5v
Output: digital switch output ( 0 and 1 )

Code:

#include <TimerOne.h>
unsigned int counter=0;
void blink()
{
counter++;

void timerIsr()

Timer1.detachInterrupt(); //disable the timer1
Serial.print("The speed of the motor: "); 
Serial.print(counter,DEC); 
Serial.println("round/s"); 
counter=0; 
Timer1.attachInterrupt( timerIsr ); //enable the timer1
}
void setup() 
{
Serial.begin(9600);
Timer1.initialize(1000000); // set a timer of length 1sec
attachInterrupt(0, blink, RISING); //INT0
Timer1.attachInterrupt( timerIsr ); // attach the service routine here

void loop()
{
; //do nothing
}
Tachometer modules can be connected to the relay to form features such as Limit switches, you can also connect to the active buzzer module, consisting of alarm.

Package Included:

1 X Tachometer Speed Module
Product Details
2 Items

Click here to leave a review

30 other products in the same category:

Digital PH Meter Tester Aquarium Pool Water Urine Wine LCD Pen Monitor Protable

This digital pen style PH meter is an ideal instrument for any aquarium, the fishing industry, swimming pools, school laboratories, food, beverage etc.This PH meter is highly efficient and accurate due to its advanced microprocessor technology.Big LCD display screen which has great waterproof performance and let you easily read the displayed value....

Price BDT 4,000
More
Last items in stock

TTP223B Digital Touch Sensor Capacitive Touch

Specification: The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode. Features: Low power consumption Power supply for 2 ~ 5.5V DC

Price BDT 250
More
In-Stock

YF-S201 Hall Effect Water Flow Meter / Sensor

Features: Model: YF-S201 Sensor Type: Hall effect Working Voltage: 5 to 18V DC (min tested working voltage 4.5V) Max current draw: 15mA @ 5V Output Type: 5V TTL Working Flow Rate: 1 to 30 Liters/Minute Working Temperature range: -25 to +80℃ Working Humidity Range: 35%-80% RH Accuracy: ±10%

Price BDT 520
More
In-Stock

MQ-9 Gas Leakage Detection Sensor

Gas Sensor(MQ9) module is useful for gas leakage detection (in home and industry). It is suitable for detecting LPG, CO, CH4. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.

Price BDT 270
More
In-stock

Brand: SparkFun Electronics

SparkFun ToF Range Finder Sensor - VL6180

Description: This is the SparkFun “Time-of-Flight”  Range Finder, a sensor board for the VL6180  distance sensor. Unlike most distance sensors  that rely on reflected light intensity or reflected  angles to determine range, the VL6180 uses a  precise clock to measure the time it takes light  to bounce back from a surface.

Price BDT 2,200
More
Pre-Order

Line Follower Sensor- 8 Array

Compatible with Pololu QTR-8RC Library  Max Distance from Ground: 3mm. Digital Line Follower Parameters: 1. Working voltage:5V2. 8-channel infrared detector / IR Reflectance  Applications: 1. Robot2. Smart Car3. Laboratory4. DIY

Price BDT 499
More
In-Stock

GY-9960LLC APDS-9960 RGB and Gesture Sensor Module

Specification:1. Small size: 11mm*27mm2. Low power consumption: Supply voltage 2.5V ~ 5V, operating current is microamps3. Linear Good4. High Sensitivity5. High stability6. Detection range: 240nm-370nm7. Large angle: 130 degrees8. The Schottky type of photodiode for photoelectric mode

Price BDT 1,000
More
In-Stock

MQ-7 Carbon Monoxide Gas Sensor

MQ-7 Carbon Monoxide Gas Sensor This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance.

Price BDT 250
More
In-stock

Arduino GSM / GPRS SIM900 Shield

Details: The GPRS Shield is based on SIM900  module from SIMCOM and compatible with  Arduino and its clones. The GPRS Shield  provides you a way to communicate using  the GSM cell phone network.

Price BDT 2,200
More
There are not enough products in stock

LM35 Temperature Sensor

Description The LM35 series are precision integrated-circuit temperature sensors, with an output voltagelinearly proportional to the Centigrade temperature. Thus the LM35 has an advantage over linear temperature sensors calibrated in ° Kelvin, as the  user is not required to subtract a large constant voltage from  the output to obtain convenient...

Price BDT 85
More
In Stock

Positioning IR Camera

Positioning IR Camera INTRODUCTION: Ever want your robot to hunt down heat objects or navigated with fire? This is  a small form factor IR camera capable of tracking up to four heat/IR sources.  The applications are plenty

Price BDT 2,200
More
Last items in stock

Waterproof DS18B20 Digital Thermal Probe or Sensor

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get any signal degradation even over long distances!

Price BDT 250
More
In-Stock

Leap Motion Controller

The Leap Motion Controller tracks both hands and all 10 fingers with pinpoint precision and incredible  speed. Setup is easy, just plug into your PC or Mac and launch Airspace, your home for Leap Motion apps. Play, create, and explore in a whole new way!In Airspace, the Leap Motion App store,

Price BDT 10,000
More
Pre-Order
Customers who bought this product also bought:

Formaldehyde/ Formalin Detection Sensor

VOC gas sensors are used to detect formaldehyde, toluene, benzene, etc., is a type of semiconductor sensors, it is widely used in ventilation, ventilation fans, air filters, hood, hood and other equipment. With high sensitivity and stability, able to detect more than 0.1ppm gas, air suitable for detecting a variety of volatile organic components...

Price BDT 2,800
More
In-Stock

SparkFun Particle Sensor Breakout - MAX30105

Features: Built-in Red, IR, and Green LEDs 5V operation (3.3V is allowed, but green LED is not guaranteed to operate) Applications include presence detection, distance sensing (18" max), pulse oximetry, blood oxygen saturation level (SpO2), smoke and particle detection Documents: Schematic Eagle Files Hookup Guide Datasheet (MAX30105) MAX3010x Sensor...

Price BDT 2,000
More
Pre-Order

Follow us on Facebook