5 Way Flame/Fire Sensor
  • 5 Way Flame/Fire Sensor
  • 5 Way Flame/Fire Sensor
  • 5 Way Flame/Fire Sensor

5 Way Flame/Fire Sensor

5 Way Flame Sensor Module Digital Analog Output Fire extinguisher Robot Arduino

 
BDT 1,500
Quantity
Last items in stock

  • Store Pickup Available! Store Pickup Available!
  • Shipping Available Shipping Available
Description
1. Five channel flame sensor design, wide range of detection
(the detection range of the ordinary single flame sensor is probably about 30°,
as the distance increases, the range is gradually reduced,
the detection range of the product is greater than 120°)
2. Able to output a digital signal (high and low), easy to use
3. Able to output an analog signal (voltage signal),
the measurement signal can be more accurately,the occasions for high precision
4. All five outputs status indicator, so whether debug or bring great convenience in the practical application of
5. Digital output detection distance adjustable.The analog output sensitivity adjustable, more flexible design
6. Using 1% resistor design, signal output is more accurate,
suitable for the needs of high-precision measurement occasions
7. Onboard 3 M3 mounting holes for easy installation
8. 3.3V-9V power supply, and is compatible with most of the SCM system
9. The patch devices used in all SMT process auto matic welding, military quality reliable
Product Details
2 Items

Click here to leave a review

30 other products in the same category:

GY-9960LLC APDS-9960 RGB and Gesture Sensor Module

Specification:1. Small size: 11mm*27mm2. Low power consumption: Supply voltage 2.5V ~ 5V, operating current is microamps3. Linear Good4. High Sensitivity5. High stability6. Detection range: 240nm-370nm7. Large angle: 130 degrees8. The Schottky type of photodiode for photoelectric mode

Price BDT 1,000
More
In-Stock

Brand: SparkFun Electronics

LIDAR-Lite v3

Features: Range: 0-40m Laser Emitter Accuracy: +/- 2.5cm at distances greater than 1m Power: 4.75–5V DC; 6V Max Current Consumption: 105ma idle; 130ma continuous Rep Rate: 1–500Hz Laser Wave Length/Peak Power: 905nm/1.3 watts Beam Divergence: 4 m Radian x 2 m Radian Optical Aperture: 12.5mm Interface: I2C or PWM

Price BDT 19,500
More
Pre-Order

MQ-2 Flammable Gas & Smoke Sensor

Gas Sensor(MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol, Smoke or Propane. Due to its high sensitivity and fast response time, measurement can be taken as soon as possible. The sensitivity of the sensor can be adjusted by the potentiometer.

Price BDT 200
More
In-stock

9 Degrees of Freedom Breakout- MPU9250

9-Axis Gyro + Accelerator + Magnetometer Sensor Module MPU-9250   Features and Specifications: Chip: MPU9250; Power voltage: 3~5V Communication mode: I2C / SPI Gyro range: +/-250, +/-500, +/-1000, +/-2000dps Accelerator range: +/-2G, +/-4G, +/-8G, +/-16G Magnetometer range: +/-4800uF Pin spacing : 2.54mm

Price BDT 1,150
More
In-stock

K Type Thermocouple Sensor Probe for Temperature Controller

Description:  Type K Type.  Mounting thread: M6  Temperature Range:0-600°C.  Thread Diameter:6mm / 0.23".  Internal Insulation:Fibreglass.  External Shielding:Metal Shield.  Total Length:1M / 39".  Fork Terminal Spacing: 3.5mm / 0.13".  Color: As Picture Shown.  10mm thread sensor for accurate measurement.

Price BDT 500
More
In-Stock

Weighing Sensor 24 Bit HX711 Dual-Channel

Weighing Sensor 24 Bit HX711 Dual-Channel Precision A/D Module Pressure Sensor. This module uses 24 high precision A/D converter chip HX711. It is a specially designed for the high precision electronic scale design, with two analog input channel, the internal integration of 128 times the programmable gain amplifier. 

Price BDT 600
More
In-Stock

Current Sensor ACS712-30A

Product Description 1. Current sensor chip: ACS712ELC-30A. 2. Pin 5V power supply, on-board power light. 3. The module can be measured plus or minus 30A current, Corresponding analog output of 66 mV / A. 4. No test current through, the output voltage is VCC / 2. 5. PCB size: 31 (mm) x13 (mm). 

Price BDT 250
More
In-Stock

JoyStick 5Pin Breakout Module For Arduino

Specification:  Brand new Color: as picture shows Size: approx. 34 x 26 x 32mm       (L x W x H) Quantity: 1pc PS2 joystick joysticks standard       interface module electronic building blocks and 2.54mm pin interface leads

Price BDT 150
More
In-Stock

RC522 RFID Card Reader Module Kit Android NFC supported

Specification: Module Name: MF522-ED Working current:13—26mA/ DC 3.3V Standby current:10-13mA/DC 3.3V sleeping current:<80uA peak current:<30mA Working frequency:13.56MHz Card reading distance :0~60mm(mifare1 card) Protocol:SPI data communication speed:Maximum 10Mbit/s

Price BDT 180
More
In-Stock

TCRT5000L Reflective Optical Sensor

The TCRT5000 and TCRT5000L are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version.

Price BDT 20
More
In-Stock
Customers who bought this product also bought:

MQ-2 Flammable Gas & Smoke Sensor

Gas Sensor(MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol, Smoke or Propane. Due to its high sensitivity and fast response time, measurement can be taken as soon as possible. The sensitivity of the sensor can be adjusted by the potentiometer.

Price BDT 200
More
In-stock

Follow us on Facebook