Dust Sensor For Arduino
  • Dust Sensor For Arduino
  • Dust Sensor For Arduino
  • Dust Sensor For Arduino
  • Dust Sensor For Arduino

Dust Sensor For Arduino

Waveshare

Dust Sensor, A simple Air Monitor

Overview

  • Sharp GP2Y1010AU0F onboard, detecting fine particle larger than 0.8μm 
       in diameter, even like the cigarette smoke
  • Low power consumption, analog voltage output, the output level is linear 
       with dust density
  • Embedded voltage boost circuit to support wide range of power supply
BDT 890
Quantity
Pre-Order

  • Store Pickup Available! Store Pickup Available!
  • Shipping Available Shipping Available
Description

Dust Sensor, A simple Air Monitor

Overview

  • Sharp GP2Y1010AU0F onboard, detecting fine particle larger than 0.8μm 
       in diameter, even like the cigarette smoke
  • Low power consumption, analog voltage output, the output level is linear 
       with dust density
  • Embedded voltage boost circuit to support wide range of power supply

 

Specifications

  • Sensitivity : 0.5V/(100μg/m3)
  • Measurement range : 500μg/m3
  • Power : 2.5V~5.5V
  • Operating current : 20mA(max)
  • Operating temperature : -10℃~65℃
  • Storage temperature : -20℃~80℃
  • Life time : 5 years
  • Dimension : 63.2mm×41.3mm×21.1mm
  • Mounting holes size : 2.0mm
  • Air hole size : 9.0mm

 

Applications

  • Air purifier
  • Air conditioner
  • Air monitor
  • PM2.5 Detector

 

How to Use

In the case of working with a MCU:

  • VCC ↔ 2.5V ~ 5.0V
  • GND ↔ GND
  • AOUT ↔ MCU.IO (analog output)
  • ILED ↔ MCU.IO (module driving pin)
Product Details

Click here to leave a review

30 other products in the same category:

MQ-135 Gas Sensor

MQ-135 module is widely used in air quality control equipments for buildings/offices, are suitable for detecting of NH3,NOx, alcohol, Benzene, smoke,CO2 ,etc

Price BDT 200
More
In-stock

JoyStick 5Pin Breakout Module For Arduino

Specification:  Brand new Color: as picture shows Size: approx. 34 x 26 x 32mm       (L x W x H) Quantity: 1pc PS2 joystick joysticks standard       interface module electronic building blocks and 2.54mm pin interface leads

Price BDT 150
More
In-Stock

AMG8833 IR Thermal Camera Breakout (Adafruit Compatible)

Add heat-vision to your project and with an AMG8833 Grid-EYE Breakout! This sensor from Panasonic is an 8x8 array of IR thermal sensors. When connected to your microcontroller (or raspberry Pi) it will return an array of 64 individual infrared temperature readings over I2C. It's like those fancy thermal cameras, but compact and simple enough for easy...

Price BDT 8,550
More
In-Stock

FLiR Thermal Imaging Camera Dev Kit

The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to be able to bring FLiR’s thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. Flir Lepton Installation Instruction 1 Flir Lepton...

Price BDT 38,500
More
Last items in stock

LM35 Temperature Sensor

Description The LM35 series are precision integrated-circuit temperature sensors, with an output voltagelinearly proportional to the Centigrade temperature. Thus the LM35 has an advantage over linear temperature sensors calibrated in ° Kelvin, as the  user is not required to subtract a large constant voltage from  the output to obtain convenient...

Price BDT 85
More
In Stock

9 Degrees of Freedom Breakout- MPU9250

9-Axis Gyro + Accelerator + Magnetometer Sensor Module MPU-9250   Features and Specifications: Chip: MPU9250; Power voltage: 3~5V Communication mode: I2C / SPI Gyro range: +/-250, +/-500, +/-1000, +/-2000dps Accelerator range: +/-2G, +/-4G, +/-8G, +/-16G Magnetometer range: +/-4800uF Pin spacing : 2.54mm

Price BDT 1,150
More
In-stock

Force Sensitive Resistor 0.5"

Description: This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance.

Price BDT 650
More
Last items in stock

9 Degrees of Freedom Breakout- MPU9150

The 9DOF MPU-9150 is the world’s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. And guess what? You get to play with it.

Price BDT 2,000
More
In Stock

RFID M94 NFC thin smart card 13.56MHz 1k S50 IC Read & Writable

Specifications: This card is compatible with NFC capable phones and tablets, it is Smart Card Tags. Frequency: 13.56 MHz 1K byte EEPROM memory (768 FREE BYTES availability) Size: 85mm x 54mm x 0.9mm Material: PVC, Waterproof Write endurance 100,000 cycle Reading distance is 0 - 10cm (Reading distance depends on readers, not the cards)

Price BDT 100
More
In-Stock

Weighing Sensor 24 Bit HX711 Dual-Channel

Weighing Sensor 24 Bit HX711 Dual-Channel Precision A/D Module Pressure Sensor. This module uses 24 high precision A/D converter chip HX711. It is a specially designed for the high precision electronic scale design, with two analog input channel, the internal integration of 128 times the programmable gain amplifier. 

Price BDT 600
More
In-Stock

Formaldehyde/ Formalin Detection Sensor

VOC gas sensors are used to detect formaldehyde, toluene, benzene, etc., is a type of semiconductor sensors, it is widely used in ventilation, ventilation fans, air filters, hood, hood and other equipment. With high sensitivity and stability, able to detect more than 0.1ppm gas, air suitable for detecting a variety of volatile organic components...

Price BDT 2,800
More
In-Stock

Current Sensor ACS712-30A

Product Description 1. Current sensor chip: ACS712ELC-30A. 2. Pin 5V power supply, on-board power light. 3. The module can be measured plus or minus 30A current, Corresponding analog output of 66 mV / A. 4. No test current through, the output voltage is VCC / 2. 5. PCB size: 31 (mm) x13 (mm). 

Price BDT 250
More
In-Stock

Brand: SparkFun Electronics

LIDAR-Lite v3

Features: Range: 0-40m Laser Emitter Accuracy: +/- 2.5cm at distances greater than 1m Power: 4.75–5V DC; 6V Max Current Consumption: 105ma idle; 130ma continuous Rep Rate: 1–500Hz Laser Wave Length/Peak Power: 905nm/1.3 watts Beam Divergence: 4 m Radian x 2 m Radian Optical Aperture: 12.5mm Interface: I2C or PWM

Price BDT 19,500
More
Pre-Order

Arduino GSM / GPRS SIM900 Shield

Details: The GPRS Shield is based on SIM900  module from SIMCOM and compatible with  Arduino and its clones. The GPRS Shield  provides you a way to communicate using  the GSM cell phone network.

Price BDT 2,200
More
There are not enough products in stock

U-Blox NEO-6M GPS Module

1) A complete GPS module with an active antenna integrated, and a built-in EEPROM to save configuration parameter data.2) Built-in 25 x 25 x 4mm ceramic active antenna provides strong satellite search capability.3) Equipped with power and signal indicator lights and data backup battery.4) Power supply: 3-5V; Default baud rate: 9600bps.5) Interface: RS232 TTL

Price BDT 845
More
In-Stock
Customers who bought this product also bought:

I2C LCD Adapter Module

As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no...

Price BDT 145
More
In Stock

4WD Smart Robot Chassis Kit

This 4WD Chassis is simple yet versatile robot chassis designed specifically for students and hobbyist. Featuring large size chassis plates cut from acrylic and designed with numerous holes and mounting points, providing plenty of space to carry a PCB board and any additional components that you choose. The possibilities are only limited by your...

Price BDT 899
More
In Stock

Follow us on Facebook