CC3D Flight Controller OpenPilot STM32 32-bit Flexiport
  • CC3D Flight Controller OpenPilot STM32 32-bit Flexiport
  • CC3D Flight Controller OpenPilot STM32 32-bit Flexiport
  • CC3D Flight Controller OpenPilot STM32 32-bit Flexiport

CC3D Flight Controller OpenPilot STM32 32-bit Flexiport

Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
Software support for Windows, Mac, and Linux.
Direct high-speed USB support with no drivers required, a true plug and play device.
BDT 1,800
Quantity
In-stock

  • Store Pickup Available! Store Pickup Available!
  • Shipping Available Shipping Available
Description
OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport

OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport for RC Drone FPV Racing Multi Rotor
OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport for RC Drone FPV Racing Multi Rotor
OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport for RC Drone FPV Racing Multi Rotor
OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport for RC Drone FPV Racing Multi Rotor

The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. 
 
CC3D CopterControl Hardware Features
Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
Software support for Windows, Mac and Linux.
Direct high speed USB support with no drivers required, a truly plug and play device.
Spektrum satellite receiver support.
Futaba S-BUS hardware support.
Innovative Flexi-port technology for superior port flexibility.
4Mbits on-board EEPROM for configuration storage.

Flexiport
CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.
 
Superior user experience
OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.
 
The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!
 
Sensors and Components
3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000
Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
Simultaneous support for multiple receivers.
ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
10 PWM outputs to servos or ESC’s, or for camera stabilization
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
Onboard USB connectivity for easy configuration.
USB and serial telemetry and configuration 
Supported by powerful OpenPilot GCS
4 Mbit onboard memory
3C Quaternion based complementary filter running at 500Hz

Note: 
Color: white and black (delivery randomly)


Installation settings for CC3D flight controller, click here.
 
Package included:
1 x CC3D Flight Controller
1 x 8p wire rod
2 x 4p expansion path
1 x flight controller case
Product Details
9 Items

Click here to leave a review

30 other products in the same category:

2 Channel Relay Board Module Optocoupler LED for Arduino PiC ARM

Relay modules suitable for switching of higher voltages and perfect for use with microcontrollers including Arduino, ARM, AVR and PIC. The relays used are rated up to 10A and have NO/NC contacts. Each channel has an LED indicator to show the relay is on.Channels: 2Connects directly to a microcontrollerSwitching Capacity: 10AMaximum Voltage: 250VAC /...

Price BDT 180
More
In Stock

HB100 Microwave Sensor 10.525GHz Doppler Radar Motion Detector Arduino 

Type: Microwave SensorChip: HB100Frequency: 10.525GHzVoltage: DC 5V±0.25VCurrent: 40mASize: 38 x 45 x 7 mm (L x W x H)Application: Automatic door startup, Car, House intrusion alarm, Collision warningTraffic monitoringNote:Please pay attention to the Voltage/Current/Power of your own devices.To ensure product safety, check whether this item is compliant...

Price BDT 1,200
More
In-Stock

801S Vibration Sensor Module vibration Analog Output Sensitivity LM393

01S Vibration Sensor Module vibration Analog Output Sensitivity LM393Size: 41 * 15 * 12.5mm The main chip: LM393, vibrating probe Operating voltage: DC 3-5V Main features: Has a signal output instructions; With analog and TTL-level signal output signal; Output valid signal is high, the light goes out; Adjustable sensitivity (fine-tuning); Vibration...

Price BDT 550
More
In-Stock

FLiR Thermal Imaging Camera Dev Kit

The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to be able to bring FLiR’s thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. Flir Lepton Installation Instruction 1 Flir Lepton...

Price BDT 38,500
More
Last items in stock

Digispark Kickstarter ATTINY85 Arduino General Micro USB Development Board

Digispark USB Development Board The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when...

Price BDT 150
More
In-Stock

60 RPM 12 Volt DC High Torque Gear Motor

Features of 60 RPM High Torque 12 Volt DC Gear Motor: 60RPM 12V DC motors with Metal Gearbox and Metal Gears. 20000 RPM base motor. 6mm Dia shaft with M3 thread hole. Length 63 mm without shaft. Shaft length 30mm. 275gm weight. 20 kg cm torque. No-load current = 0.15 mA, Load current = upto 4 A(Max).

Price BDT 2,200
More
In-Stock

Brand: SparkFun Electronics

SparkFun ToF Range Finder Sensor - VL6180

Description: This is the SparkFun “Time-of-Flight”  Range Finder, a sensor board for the VL6180  distance sensor. Unlike most distance sensors  that rely on reflected light intensity or reflected  angles to determine range, the VL6180 uses a  precise clock to measure the time it takes light  to bounce back from a surface.

Price BDT 2,200
More
Pre-Order

Brand: DFRobot

4WD Smart Robot Chassis Kit

This 4WD Chassis is simple yet versatile robot chassis designed specifically for students and hobbyist. Featuring large size chassis plates cut from acrylic and designed with numerous holes and mounting points, providing plenty of space to carry a PCB board and any additional components that you choose. The possibilities are only limited by your...

Price BDT 899
More
In Stock

Reference: Sparkfun

XBee 1mW Trace Antenna - Series 1 (802.15.4)

Description: This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point...

Price BDT 2,350
More
Last items in stock

Brand: SparkFun Electronics

EasyVR Shield 3.0 - Voice Recognition Shield

Description:  Do you make time to talk to your Arduino? Maybe you should! The Easy VR Shield 3.0 is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC.

Price BDT 4,500
More
Pre-Order

Torobot 32 Channel USB UART Servo Motor Controller

32 Channel USB UART Servo Motor Controller  Application: Hexapod, Robotics Arm, Servo Drive This is the newly upgraded controller board. Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication ( TTL serial port) of MCU (51, AVR, ARM, FPGA, PIC, etc. to send commands to control the steering.

Price BDT 3,300
More
In-Stock

Arduino 2 Wheel Drive Mobile Robot Platform Chassis

Features: Model: HC-1 Quantity: 1 Color: Transparent + Yellow Material: Acrylic Working voltage: 3~12V RPM: 120 (Under 3V) Gear motor deceleration indicator Chassis made from acrylic material With installation holes, easy to use Great for DIY project Dimensions: 7.72 in x 4.13 in x 0.12 in (19.6 cm x 10.5 cm x 0.3 cm) Weight: 14.29 oz (405 g)

Price BDT 600
More
In Stock

RC522 RFID Card Reader Module Kit Android NFC supported

Specification: Module Name: MF522-ED Working current:13—26mA/ DC 3.3V Standby current:10-13mA/DC 3.3V sleeping current:<80uA peak current:<30mA Working frequency:13.56MHz Card reading distance :0~60mm(mifare1 card) Protocol:SPI data communication speed:Maximum 10Mbit/s

Price BDT 180
More
In-Stock
Customers who bought this product also bought:

Follow us on Facebook