3.5inch RPi LCD (A), 320×480 (Original Waveshare)
  • 3.5inch RPi LCD (A), 320×480 (Original Waveshare)
  • 3.5inch RPi LCD (A), 320×480 (Original Waveshare)
  • 3.5inch RPi LCD (A), 320×480 (Original Waveshare)
  • 3.5inch RPi LCD (A), 320×480 (Original Waveshare)
  • 3.5inch RPi LCD (A), 320×480 (Original Waveshare)
  • 3.5inch RPi LCD (A), 320×480 (Original Waveshare)
  • 3.5inch RPi LCD (A), 320×480 (Original Waveshare)
  • 3.5inch RPi LCD (A), 320×480 (Original Waveshare)

3.5 inch RPi Touch Screen (A), 320×480 (Original Waveshare)

Waveshare

Raspberry 3 Model B Comaptible.

Installation Method and Details

Features
  • Designed for Raspberry Pi, an ideal alternative solution for HDMI monitor
  • Supports any revision of Raspberry Pi (directly-pluggable)
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • 320×480 resolution, better display
BDT 3,300
Quantity
Last items in stock

  • Store Pickup Available! Store Pickup Available!
  • Shipping Available Shipping Available
Description
3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi

Features
  • Designed for Raspberry Pi, an ideal alternative solution for HDMI monitor
  • Supports any revision of Raspberry Pi (directly-pluggable)
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • 320×480 resolution, better display
  • Convenient Men-Machine interface for Raspberry Pi, combined with the 
       portable power, DIY anywhere anytime
  • Supports Raspbian system, enables your system to:
  • Take photos by touching (up to 17 camera modes)
  • Support software keyboard (system interaction without keyboard/mouse)
  • High quality immersion gold surface plating

Key Parameters
LCD Type
TFT
LCD Interface
SPI
Touch Screen Type
Resistive
Touch Screen Controller
XPT2046
Colors
65536
Backlight
LED
Resolution
320*480 (Pixel)
Aspect Ratio
8:5
Power Consumption
TBD
Backlight Current
TBD
Operating Temp. ()
TBD
 
Interface
PIN NO.
SYMBOL
DESCRIPTION
1, 17
3.3V
Power positive (3.3V power input)
2, 4
5V
Power positive (5V power input)
3, 5, 7, 8, 10, 12, 13, 15, 16
NC
NC
6, 9, 14, 20, 25
GND
Ground
11
TP_IRQ
Touch Panel interrupt, low level while
the Touch Panel detects touching
18
LCD_RS
Instruction/Data Register selection
19
LCD_SI / TP_SI
SPI data input of LCD/Touch Panel
21
TP_SO
SPI data output of Touch Panel
22
RST
Reset
23
LCD_SCK / TP_SCK
SPI clock of LCD/Touch Panel
24
LCD_CS
LCD chip selection, low active
26
TP_CS
Touch Panel chip selection, low active
 
Downloads
Development resources:Image, schematic, dimension, software, etc.
Download: www.waveshare.com/wiki/3.5inch_RPi_LCD_(A)

FAQ

Why the LCD doesn't work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver
should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided
image directly.

Why the LCD still doesn't work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the
Raspberry Pi starts up successfully, in case both of the two LEDs
keep on, it is possible that the image was burnt incorrectly OR the
TF card was in bad contact. 

Which power supply should I use?
It is strongly recommended to use a stand-alone 5V/2A power
adapter, because the PC's USB port might have not enough power
to support the Pi and LCD.
 
Product Details
2 Items

Click here to leave a review

30 other products in the same category:

SDHC Card 32 GB (Class 10) with Raspbian OS.

This SD Card is original 32 GB Class 10,  MMC It's for Raspberry PI. This SD Card is loaded with Raspbian OS.   Capacity 32GB, Micro Card Class 10/UHS-I Speed: Up to 95MB/s read speed, up to 45MB/s write Perfect for Apple iPhone/tablets/Digital Cameras/Raspberry Pi Box contents: Transcend 32GB Micro, premium 300s Class 10 UHS-I, SDHC10 card with adapter

Price BDT 950
More
There are not enough products in stock

Reference: Sparkfun

Pi 3 B+ Wedge Kit GPIO Breakout Expansion Board

GPIO Extension Board: Compatible For Raspberry PI Module: T Type GPIO Extension Adapter GPIO Signal Ribbon Flat Cable:Length: 20cm Compatible For Raspberry Pi 3 Model B+GPIO Connector: 40-Pin This 40 Pin Ribbon Cable is Specially Designed For the Raspberry Pi Model 3, So You can Easily Connect it to the Low-Level Peripherals! Package Included:1 x T Type...

Price BDT 499
More
In-stock

Brand: Waveshare

Raspberry Pi 5inch Resistive Touch HDMI LCD

5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Installation Instruction: http://www.waveshare.com/wiki/5inch_HDMI_LCD Raspbian Image for 5 inch HDMI Diplay with Touch :  Raspbian 5 inch HDMI with Touch Download Link    

Price BDT 4,850
More
Pre-Order

3.5inch Raspberry Pi LCD (A)

3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi Product Replaced By: New Raspberry Pi 3 Display Driver & Details: http://www.waveshare.com/wiki/3.5inch_RPi_LCD_(A)

Price BDT 4,000
More
There are not enough products in stock

Brand: Farnell Element14

Raspberry Pi 3 Model B (Made in UK)

Replaced by Raspberry Pi 3 Model B+ Click Here The Raspberry Pi 3 is the third generation Raspberry Pi. A 1.2GHz 64-bit quad-core ARMv8 CPU 802.11n Wireless LAN Bluetooth 4.1 Bluetooth Low Energy (BLE) 1GB RAM 4 USB ports 40 GPIO pins Full HDMI port Ethernet port

Price BDT 3,800
More
There are not enough products in stock

Brand: Waveshare

Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600

What's on Board Raspberry Pi GPIO interface : for connecting Raspberry Pi USB TO UART : control the Pi through serial terminal AD/DA IO interface : screw terminal 1-WIRE interface : for connecting 1-WIRE devices like DS18B20 Sensor interface : for connecting various sensors 0.96inch OLED : SSD1306 driver, 128×64 resolution, SPI interface Buzzer

Price BDT 3,500
More
Last items in stock

Raspberry Pi Zero

The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!

Price BDT 1,450
More
In-Stock

Raspberry Pi 3 Model B+ (Made in UK)

Raspberry Pi 3 Model B+  (Made in UK) Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz 1GB LPDDR2 SDRAM 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps) Extended 40-pin GPIO header Full-size HDMI 4 USB 2.0 ports

Price BDT 3,799
More
In-Stock

Raspberry Pi 3 Kodi Home Theater Complete Set

Raspberry Pi 3 Kodi Home Theater. Raspberry Pi 3  KODI Media Center Kit Raspberry Pi 3 Model B Raspberry Pi Cooling Fan Case Heat Sink 16GB Class 10 MicroSD with KODI And Addon Installed HDMI Cable Raspberry Pi Power Adapter Raspberry Pi Remote Built in Wifi and Bluetooth

Price BDT 7,900
More
Pre-Order

Brand: Waveshare

5inch HDMI Touch Screen (B) + Bicolor Case (Original Waveshare)

5inch HDMI LCD with TouchScreen (B) + Bicolor Case Installation Method & Driver System Support: Raspberry Pi /  Windows / Support any HDMI System with Touch The LCD 800×480 high resolution Resistive touch control Supports Raspberry Pi Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images Supports BB Black, comes with Angstrom image

Price BDT 4,800
More
In-Stock

Raspberry Pi Zero W

The Raspberry Pi Zero W is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!  The Raspberry Pi Zero W extends the Pi Zero family and comes with added wireless LAN and Bluetooth connectivity.

Price BDT 2,050
More
In-Stock

Pi Tin for the Raspberry Pi 2 Clear Case

Description: The Raspberry Pi B+ is everybody’s favorite  little computer, the last thing that you’d want is for something  bad to happen to it. Why not protect it with one of these  snazzy plastic enclosures?

Price BDT 900
More
Pre-Order

Cubieboard A20

An upgrade of cubieboard, cubieboard A20 is coming. Compared with cubieboard, the cubieboard A20 uses an Allwinner A20 processor which has a dual core CPU and twice GPU performance. On the software side, cubieboard2 supports both android 4.2 Jelly Bean, Ubuntu 12.04 and other Linux distributions.

Price BDT 5,500
More
Pre-Order

Leap Motion Controller

The Leap Motion Controller tracks both hands and all 10 fingers with pinpoint precision and incredible  speed. Setup is easy, just plug into your PC or Mac and launch Airspace, your home for Leap Motion apps. Play, create, and explore in a whole new way!In Airspace, the Leap Motion App store,

Price BDT 10,000
More
Pre-Order

Reference: DEV-12856

pcDuino3 - Dev Board

Description: The pcDuino3 is a high performance, cost effective mini PC platform that runs full-featured operating systems such as Ubuntu and Android. In addition to running Linux and Android, the pcDuino3 has support for programming languages such as C, C++, Java, Python, Arduino, and more. You can even use your favorite Arduino shields for added...

Price BDT 7,500
More
Pre Order
Customers who bought this product also bought:

Raspberry Pi 3 Model B (Made in UK)

Replaced by Raspberry Pi 3 Model B+ Click Here The Raspberry Pi 3 is the third generation Raspberry Pi. A 1.2GHz 64-bit quad-core ARMv8 CPU 802.11n Wireless LAN Bluetooth 4.1 Bluetooth Low Energy (BLE) 1GB RAM 4 USB ports 40 GPIO pins Full HDMI port Ethernet port

Price BDT 3,800
More
There are not enough products in stock

Reference: Sparkfun

Pi 3 B+ Wedge Kit GPIO Breakout Expansion Board

GPIO Extension Board: Compatible For Raspberry PI Module: T Type GPIO Extension Adapter GPIO Signal Ribbon Flat Cable:Length: 20cm Compatible For Raspberry Pi 3 Model B+GPIO Connector: 40-Pin This 40 Pin Ribbon Cable is Specially Designed For the Raspberry Pi Model 3, So You can Easily Connect it to the Low-Level Peripherals! Package Included:1 x T Type...

Price BDT 499
More
In-stock

Follow us on Facebook