RC522 RFID Card Reader Module Kit Android NFC supported
  • RC522 RFID Card Reader Module Kit Android NFC supported

RC522 RFID Card Reader Module Kit Android NFC supported

Specification:

  • Module Name: MF522-ED
  • Working current:13—26mA/ DC 3.3V
  • Standby current:10-13mA/DC 3.3V
  • sleeping current:<80uA
  • peak current:<30mA
  • Working frequency:13.56MHz
  • Card reading distance :0~60mm(mifare1 card)
  • Protocol:SPI
  • data communication speed:Maximum 10Mbit/s
BDT 180
Quantity
In-Stock

  • Store Pickup Available! Store Pickup Available!
  • Shipping Available Shipping Available
Description

Product Description

RC522 IC Brief Introduction

MF RC522 is used in highly integrated 13.56MHz contactless communication card chip to read and write, of NXP for “three” and the application launched a low voltage, low cost, small size, non-contact card chip to read and write, intelligent instruments and portable handheld devices developed better.

The MF RC522 use of advanced modulation and demodulation concept completely integrated in the 13.56MHz all kinds of passive contactless communication methods and protocols. 14443A compatible transponder signal. The digital part handles the the ISO14443A frames and error detection. In addition, support Quick CRYPTO1 encryption algorithm, the term verification MIFARE series. MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transfer rates up to 424kbit / s.

As 13.56MHz highly integrated card reader series chip new family, the MF RC522 MF RC500 MF RC530 there are many similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode, helps to reduce the connection, reduce PCB board volume and reduce costs.

RFID Module Brief Introduction

MFRC522-AN module uses Philips MFRC522 original chip design circuit card reader, easy to use, low cost, suitable for equipment development, the development of advanced applications reader users, the need for RF card terminal design / production users. This module can be directly loaded into the variety of reader molds.Module uses voltage of 3.3V, simple few lines through the SPI interface directly with any user CPU board is connected to the communication module can guarantee stable and reliable work, reader distance.

Features: 13.56Mhz, S50, Mifare One

Specification:

  • Module Name: MF522-ED
  • Working current:13—26mA/ DC 3.3V
  • Standby current:10-13mA/DC 3.3V
  • sleeping current:<80uA
  • peak current:<30mA
  • Working frequency:13.56MHz
  • Card reading distance :0~60mm(mifare1 card)
  • Protocol:SPI
  • data communication speed:Maximum 10Mbit/s
  • Card types supported:mifare1 S50、mifare1 S70、mifare UltraLight、mifare Pro、mifare Desfire
  • Dimension:40mm×60mm
  • Environment
  • Working temperature:-20—80 degree
  • Storage temperature:-40—85 degree
  • Humidity:relevant humidity 5%—95%
  • Max SPI speed: 10Mbit/s

Packaging:

  • RFID-RC522 Module *1
  • Standard empty RC522 Card *1
  • RC522 Key *1
  • Break away pin straight *1
  • Break away pin 90 degree *1
 

Documentation:

Product Details
26 Items

Click here to leave a review

30 other products in the same category:

SparkFun Particle Sensor Breakout - MAX30105

Features: Built-in Red, IR, and Green LEDs 5V operation (3.3V is allowed, but green LED is not guaranteed to operate) Applications include presence detection, distance sensing (18" max), pulse oximetry, blood oxygen saturation level (SpO2), smoke and particle detection Documents: Schematic Eagle Files Hookup Guide Datasheet (MAX30105) MAX3010x Sensor...

Price BDT 2,000
More
Pre-Order

GPRS GSM SIM900 Arduino Shield

The GPRS Shield provides you a way to use the GSM cell phone network to receive data from a remote location. The shield allows you to achieve this via any of the three methods: Short Message Service Audio GPRS Service

Price BDT 2,100
More
In-Stock

Arduino 3G+Wifi+Ethernet Shield

Iduino Yun Shield Compatible with Arduino Leonardo, Uno, Duemilanove, Diecimila and Mega Arduino 3G+Wifi+Ethernet Shield Robotics Bangladesh 3g+ Wifi+ Ethernet + USB+ Openwrt (Linux) Geeetech Latest Iduino Yun Shield board Linux WiFi 3G Ethernet USB for Arduino http://www.geeetech.com/wiki/index.php/Iduino_Yun_Shield

Price BDT 5,500
More
Last items in stock

Brand: DFRobot

Arduino GPS/GPRS/GSM Shield V3.0

INTRODUCTION This is a Arduino GPS/GPRS/GSM shield from DFRobot. This shield with a Quad-band GSM/GPRS engine works on frequencies EGSM 900MHz/DCS 1800MHz and GSM850 MHz/PCS 1900MHz. It also supports GPS

Price BDT 7,200
More
Pre-Order

Arduino Ethernet Shield Basic

Arduino Ethernet Shield in Bangladesh - With this Ethernet Shield, your Arduino board can be connected to internet- Uses ENC28J60 SPI Ethernet controller and compatible HR911102A RJ45 socket- Web client application to use Arduino as a distributed network sensor- Stackable by accepting prototype shield or any other boards with Arduino compatible interface

Price BDT 1,900
More
There are not enough products in stock

Torobot 32 Channel USB UART Servo Motor Controller

32 Channel USB UART Servo Motor Controller  Application: Hexapod, Robotics Arm, Servo Drive This is the newly upgraded controller board. Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication ( TTL serial port) of MCU (51, AVR, ARM, FPGA, PIC, etc. to send commands to control the steering.

Price BDT 3,300
More
In-Stock

Reference: Geekcreit™

Arduino UNO (China)

Arduino UNO  China Made by Geekcreit™. Double rail pinheader for more advance use. So for every pin you can now connect two jumper. With USB Cable.  ATmega328P Development Board For Arduino

Price BDT 550
More
Pre-Order

9 Degrees of Freedom Breakout- MPU9150

The 9DOF MPU-9150 is the world’s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. And guess what? You get to play with it.

Price BDT 2,000
More
In Stock

Brand: Waveshare

Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600

What's on Board Raspberry Pi GPIO interface : for connecting Raspberry Pi USB TO UART : control the Pi through serial terminal AD/DA IO interface : screw terminal 1-WIRE interface : for connecting 1-WIRE devices like DS18B20 Sensor interface : for connecting various sensors 0.96inch OLED : SSD1306 driver, 128×64 resolution, SPI interface Buzzer

Price BDT 3,500
More
Last items in stock

Reference: LCD Shield

Arduino LCD Shield

Arduino LCD Shield (Fully Arduino Compatible) with Bluetooth Port Compatible with LiquidCrystal Library Arduino PinLiquidCrystal lcd(12, 11, 5, 4, 3, 2) No more hassle, connect an LCD to Arduino easily, Plug &amp; Play.

Price BDT 600
More
Pre-Order

Arduino GSM / GPRS SIM900 Shield

Details: The GPRS Shield is based on SIM900  module from SIMCOM and compatible with  Arduino and its clones. The GPRS Shield  provides you a way to communicate using  the GSM cell phone network.

Price BDT 2,200
More
There are not enough products in stock

Digital PH Meter Tester Aquarium Pool Water Urine Wine LCD Pen Monitor Protable

This digital pen style PH meter is an ideal instrument for any aquarium, the fishing industry, swimming pools, school laboratories, food, beverage etc.This PH meter is highly efficient and accurate due to its advanced microprocessor technology.Big LCD display screen which has great waterproof performance and let you easily read the displayed value....

Price BDT 4,000
More
Last items in stock

Brand: SparkFun Electronics

Intel® Edison and Arduino Breakout Kit

Description: The Intel® Edison is an ultra small  computing platform that will change the way you  look at embedded electronics. Each Edison is  packed with a huge amount of tech goodies into  a tiny package while still providing the same  robust strength of your go-to single board computer.

Price BDT 12,500
More
Pre-Order
Customers who bought this product also bought:

Raspberry Pi 3 Model B (Made in UK)

Replaced by Raspberry Pi 3 Model B+ Click Here The Raspberry Pi 3 is the third generation Raspberry Pi. A 1.2GHz 64-bit quad-core ARMv8 CPU 802.11n Wireless LAN Bluetooth 4.1 Bluetooth Low Energy (BLE) 1GB RAM 4 USB ports 40 GPIO pins Full HDMI port Ethernet port

Price BDT 3,800
More
There are not enough products in stock

Mini Breadboard

Description: This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumper wires! If you run out of room, no worries, these mini breadboards can be snapped together to form larger stretches of board...

Price BDT 50
More
In-Stock

Follow us on Facebook